Protek have developed Stable Coat Light Green as a colour match to the green pressure-treatment that timber
for new stables and outbuildings are manufactured and constructed with.
This colour can be used to re-treat timber once the pressure-treatment colour has faded or to match in paddock fencing and other buildings.
Stable Coat is easy to apply and designed for use on old or new stables; it is low in odour and has a
low VOC (Volatile Organic Compounds) content. Stable Coat offers great coverage with 1 litre covering
approximately 10m2 depending on the moisture content and porosity of the timber. One coat will give a
high level of protection; further coats will enhance the colour and give more time before re-treatment is required.
FINISH - Matt with a soft sheen
LIFESPAN - 1 – 3 years depending on levels of wear & tear + exposure
COATS - 2 coats with a single coat for maintenance
COVERAGE - Approx. 8 – 12m2 per litre per coat.
Coverage rates for 1st coat and rough-sawn timber will be at the lower end
APPLY BY - Brush, Roller or Low Pressure Sprayer
DRYING TIME - Touch-dry in 2 hours in normal weather. Allow approx. 2-4 hours before applying 2nd coat if conditions are clear and dry.
Drying time will be far longer in cold humid conditions
VOC & ODOUR - Low
Vertical & Horizontal surfaces
Planed & Rough-Sawn timber
Stables & Yard Fencing; Outhouses; Barns;
Animal Housing; Chicken Sheds & Coups
AVAILABLE IN - 5 litre container or 25 litre drum
TIPS - For a lighter shade of colour apply a single coat with a coat of Stable Coat Clear on top to provide full levels of protection.
Stable Coat is a highly-repellent coating. If too long is left between the first and second coat the 1st coating will repel the 2nd evident by beading. If this happens either sand back lightly or leave the first coat to weather for a couple of months before applying the second coat.
Stable Coat Light Green
- Brand: Shedcare
- Product Code: Stable Coat Light Green
- Availability: In Stock