This strong dark brown treatment will cover over any existing colours and tie
in any new buildings or repairs to give a uniform and elegant finish. The dark brown
colour is very much like the old mixtures of oil that were used in times past but with a
more pleasing dark chocolate coloured base.

Stable Coat is easy to apply and designed for use on old or new stables; it is low in odour
and has a low VOC (Volatile Organic Compounds) content. Stable Coat offers great coverage
with 1 litre covering approximately 10m2 depending on the moisture content and porosity of the timber.
One coat will give a high level of protection; further coats will enhance the colour and give more time before re-treatment is required.

Protek Stable Coat is a water-based micro-porous acrylic coating that incorporates a ultra-high
performance water repellency additive that uses nanotechnology to deliver an extreme hydrophobic layer of protection.
Protek Stable Coat offers excellent long-term protection for stables and all timber buildings.
The coating is also resistant to mould and fungal attack. 
FINISH - Matt with a soft sheen

LIFESPAN - 1 – 3 years depending on levels of wear &  tear + exposure

COATS - 2 coats with a single coat for maintenance

COVERAGE - Approx. 8 – 12m2 per litre per coat.
Coverage rates for 1st coat and rough-sawn timber will be at the lower end

APPLY BY - Brush, Roller or Low Pressure Sprayer

DRYING TIME - Touch-dry in 2 hours in normal weather. Allow approx. 2-4 hours before applying 2nd coat if conditions are clear and dry.
Drying time will be far longer in cold humid conditions

VOC & ODOUR - Low

SUITABLE FOR
Softwood
Vertical & Horizontal surfaces
Planed & Rough-Sawn timber
Stables & Yard Fencing; Outhouses; Barns;
Animal Housing; Chicken Sheds & Coups

AVAILABLE IN - 5 litre container or 25 litre drum

TIPS - For a lighter shade of colour apply a single coat with a coat of Stable Coat Clear on top to provide full levels of protection.

Stable Coat is a highly-repellent coating. If too long is left between the first and second coat the 1st coating will repel the 2nd evident by beading. If this happens either sand back lightly or leave the first coat to weather for a couple of months before applying the second coat.

Write a review

Note: HTML is not translated!
    Bad           Good

Stable Coat Dark Brown

  • Brand: Shedcare
  • Product Code: Stable Coat Dark Brown
  • Availability: In Stock
  • £29.50


Available Options