This dramatic solid black colour will transform any stable yard into a modern stylish place and will give the buildings a look of sleek
quality with the coating leaving a black soft sheen. Black is one of our most popular colours being used on everything from traditional barns to new timber buildings.
Protek Stable Coat has been specifically formulated for the exterior treatment of timber stables.
A high quality treatment that is easy to apply either by a brush, roller or sprayer so large areas may be treated quickly and economically.
Stable Coat is a water-based micro-porous coating that uses next generation nanotechnology to deliver an extremely hydrophobic
finish that will prolong the life of your timber stable.
FINISH - Matt with a soft sheen
LIFESPAN - 1 – 3 years depending on levels of wear & tear + exposure
COATS - 2 coats with a single coat for maintenance
COVERAGE - Approx. 8 – 12m2 per litre per coat.
Coverage rates for 1st coat and rough-sawn timber will be at the lower end
APPLY BY - Brush, Roller or Low Pressure Sprayer
DRYING TIME - Touch-dry in 2 hours in normal weather. Allow approx. 2-4 hours before applying 2nd coat if conditions are clear and dry.
Drying time will be far longer in cold humid conditions
VOC & ODOUR - Low
Vertical & Horizontal surfaces
Planed & Rough-Sawn timber
Stables & Yard Fencing; Outhouses; Barns;
Animal Housing; Chicken Sheds & Coups
AVAILABLE IN - 5 litre container or 25 litre drum
TIPS - For a lighter shade of colour apply a single coat with a coat of Stable Coat Clear on top to provide full levels of protection.
Stable Coat is a highly-repellent coating. If too long is left between the first and second coat the 1st coating will repel the 2nd evident by beading. If this happens either sand back lightly or leave the first coat to weather for a couple of months before applying the second coat.
Stable Coat - Black
- Brand: Shedcare
- Product Code: Stable Coat Black
- Availability: In Stock